PG4 Wireless Diversity Receiver ไมโครโฟนไร้สาย (ไมค์ลอย shure ของแท้ มหาจักร)
PG4 Wireless Diversity Receiver
PG2 Handheld Transmitter
- Up to 10 selectable channels
- Up to 8 compatible systems*
- 1/4" and XLR output
- Internal antenna diversity
PG2 Handheld Transmitter
Power, mute and battery status LED
Power and mute switch
9V battery (included) provides 8 hours of battery life
75m (250 ft.) operating range
Replacement cartridge: PG58
Overview
All Systems |
PG4 or PG88 Receiver Internal Diversity Antenna System
|
One 9 volt battery
|
AC Power supply
|
User guide
|
Vocalist System |
Microphone Head
|
PG2 handheld transmitter
|
Microphone clip
|
Instrument System |
PG1 bodypack transmitter
|
4-pin mini connector (TA4F) to 1/4" connector cable
|
Lavalier and Headworn System |
PG1 bodypack transmitter
|
Microphone (choice of PG185, PG30)
|
Replacement Parts
All Systems |
Microphone Stand Adapter (PGX2) |
WA371 |
System-Specific |
AC Adapter (120 VAC, 60 Hz) |
PS21 |
AC Adapter (230 VAC, 50/60 Hz, Europlug) |
PS21E |
AC Adapter (230 VAC, 50/60 Hz, UK) |
PS21UK |
AC Adapter (100 VAC, 50/60 Hz) |
PS21J |
AC Adapter (220 VAC, 50 Hz, China) |
PS21CHN |
AC Adapter (230 VAC, 50 Hz,, Australia) |
PS21AZ |
AC Adapter (220 VAC, 60 Hz, Korea |
PS21K |
PG58 Head with Grille |
RPW108 |
Belt Clip |
44A8035 |
Optional |
Universal Rack Tray |
URT |
4-pin mini connector (TA4F) to 1/4" connector cable |
WA302 |
Technical Specifications
Working Range |
75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference. |
Audio Channel Response |
Minimum: 45 Hz. Maximum: 15 kHz (overall system channel depends on microphone element). |
Total Harmonic Distortion |
0.5%, typical Ref. +/- 33 kHz deviation, 1 kHz tone |
Dynamic Range |
>100 dB A-weighted, typical |
Operating Temperature Range |
-18°C (0°F) to +57°C (+135°F) Note: battery characteristics may limit this range |
Transmitter Audio Polarity |
Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output. |
PG4 and PG88 Receiver
Output Impedance |
XLR connector: 200 Ω 1/4 inch connector: 1kΩ |
Audio Output Level Ref.
+/– 33 kHz deviation with
1 kHz tone |
XLR connector (into 100K Ω load): –19 dBV, typical
1/4 inch connector (into 100K Ω load): –5 dBV, typical
|
Sensitivity |
–105 dBm for 12 dB SINAD, typical |
Image Rejection |
>50 dB, typical |
Dimensions |
188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) |
Dimensions - PG88 |
388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) |
Weight |
241 grams (8.5 oz) |
Weight - PG88 |
429 grams (15.1 oz) |
Housing |
Molded ABS |
Power Requirements |
12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply |
PG1 Bodypack Transmitter
Audio Input Level |
-10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at -10dB gain position
|
Gain Adjustment Range |
30 dB |
Input Impedance |
1mΩ |
RF Transmitter Output |
10 mW typical (dependent on applicable country regulations) |
Dimensions |
110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.) |
Weight |
75 grams (2.6 oz.) without battery |
Housing |
Molded ABS |
Power Requirements |
One 9V alkaline or rechargeable battery |
Battery Life |
Up to 8 hours (alkaline) |
PG2 Handheld Transmitter
Audio Input Level |
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
|
Gain Adjustment Range |
10dB |
RF Transmitter Output |
10 mW typical (dependent on applicable country regulations) |
Dimensions |
223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) |
Weight |
218 grams (7.7 oz.) without battery |
Housing |
Molded ABS handle and battery cup |
Power Requirements |
One 9V alkaline or rechargeable battery |
Battery Life |
Up to 8 hours (alkaline) |
|