Minimum Guaranteed Power
per channel, both channels driven |
| |
XLS 202
|
XLS 402
|
XLS 602
|
XLS 802
|
XLS 5000
|
| 1 kHz with 0.5% THD |
|
|
|
|
|
| Stereo, 2 ohms (per ch.) |
-- |
-- |
-- |
-- |
2,500W** |
| Stereo, 4 ohms (per ch.) |
300W |
450W |
600W |
800W |
1,800W* |
| Stereo, 8 ohms (per ch.) |
200W |
300W |
380W |
500W |
1,100W* |
| Bridge-Mono, 8 ohms |
600W |
900W |
1,200W |
1,600W |
3,600W* |
| Bridge-Mono, 4 ohms |
-- |
-- |
-- |
--
*750W for
100V
models |
5,000W**
*with 0.1% THD
**with 1% THD |
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
For product availability and pricing please contact your local dealer.
Specifications
Sensitivity (volts RMS) for full rated power at
4 ohms |
1.25
|
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) |
+0 dB, –1 dB
|
Signal to Noise Ratio below rated power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power |
> 100 dB
> 95 dB
|
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz |
< 0.5%
|
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB |
< 0.3%
|
| Damping Factor (8 ohm): 10 Hz to 400 Hz |
> 200
|
Crosstalk (below rated power)
at 1 kHz
at 20 kHz |
–75 dB
–50 dB
|
Input Impedance (nominal) (balanced,
unbalanced) |
20 kilohms, 10 kilohms
|
Load impedance
Stereo
Bridge mono |
4-8 ohms
8 ohms
|
| AC Line Voltage and Frequency Configurations Available (± 10%) |
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Internal heat sinks with forced-air cooling
|
Air Volume Requirements (per minute
per unit) |
80.15 ft3 (2.27 m3)
|
| Dimensions: Width, Height, Depth |
XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D.
XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
|
| Net Weight, Shipping Weight |
|
