TANNOY CVS 4 Micro ลำโพงติดเพดาน Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter

Speaker ตู้ลำโพง > Ceiling Speaker ลำโพงติดเพดาน > TANNOY

TANNOY CVS 4 Micro

$TANNOY CVS 4 Micro ลำโพงติดเพดาน Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter$

[

คลิกเพื่อดูภาพขยาย]

รหัส : CVS 4 Micro

ยี่ห้อ : TANNOY

รุ่น : CVS 4 Micro

ราคาปกติ : 6,000.00

รายละเอียดย่อ :

ลำโพงติดเพดาน Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter

รายละเอียดทั้งหมด :

TANNOY CVS 4 Micro ลำโพงติดเพดาน Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter

CVS 4 Micro is a full bandwidth ceiling speaker system comprising a 100mm (4”) mid bass driver with a coaxially mounted 19mm (0.75”) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The shallow back can equipped CVS 4 Micro is designed to suit those demanding situations where ceiling cavity space is limited but there’s still a requirement for high quality, natural sound.

The CVS 4 Micro is supplied with an exceptionally shallow steel back can with recessed termination box to satisfy the vast majority of installation application requirements. The removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory.

Features

Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter
Shallow back can for limited cavity space
High power & high sensitivity with very low distortion Wide, controlled constant directivity dispersion for optimum coverage UV/weather resistant UL94V-0 ABS front baffle
Easily accessible tapping switch on front baffle
Low insertion loss 15W line transformer
Ferrofluid cooled neodymium HF
Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics

Applications

Auditoria / Lecture Theatres
Ballrooms and convention Centres
Bars & Restaurants
Casinos
Concourses
Conference rooms
Fitness Centres & Leisure Facilities
Hotels
Museums & Galleries
Retail Spaces & Malls

System
Frequency Response (-3dB) 1	110Hz - 19kHz
Frequency Range (-10dB) 1	90Hz - 22kHz
System Sensitivity (1W @1m) 2	87dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle	90 degrees conical
Coverage Angle (1kHz to 6kHz)	102 degrees conical
Directivity Factor (Q)	5.6 averaged 1kHz to 6kHz
Directivity Index (DI)	7.1 averaged 1kHz to 6kHz
Rated Maximum SPL	Average Peak 103dB 109dB
Power Handling	Average Programme Peak 40W 80W 160W
Recommended Amplifier Power	80W @ 6 Ohms
Nominal Impedance	6 Ohms
Transformer Taps (via front rotary switch)
70V	15W / 7.5W / 3.5W / 1.9W / OFF & Low Impedance operation
100V	15W / 7.5W / 3.75W / OFF & Low Impedance operation
Distortion
10% Full Power	2nd Harmonic 3rd Harmonic
250Hz	0.231% 0.112%
1kHz	0.229% 0.253%
10kHz	0.163% 0.025%
1% Full Power	2nd Harmonic 3rd Harmonic
250Hz	0.99% 0.169%
1kHz	0.816% 0.027%
10kHz	0.444% 0.07%
Crossover	2.7kHz
Transducers
	Coaxial
Low Frequency	100mm (4.00") mineral loaded cone material
High Frequency	19mm (0.75")
Physical
Enclosure	Blind Mount (BM)
Backcan	Zinc Plated Steel
Baffle	Reflex loaded UL 94V-0 rated ABS
Grille	Steel, with weather resistant coating
Safety Features	Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design	Security Toggle Clamp
Cable Entry Options	Cable Clamp & Squeeze connector for conduit up to 22mm
Connectors	Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings	UL-1480, UL-2043, CE
Dimensions
Bezel Diameter	213mm (8.39")
Front of Ceiling to Rear of Backcan	98.3mm (3.87")
Front of Ceiling to cable entry centre	46.5mm (1.83")
Template hole cutout size	180mm (7.09")
Net Weight (ea)	2.60kg (5.72lbs)
Included Accessories	C Ring, tile bridge, paint mask, cutout template, grille
Optional Accessories	Plaster (mud) ring

จำนวน